Datasheet
3
D2F Ultra Subminiature Basic Switch
D
2
F
Characteristics
Note. The data given above are initial values.
*1. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever.
Close or open circuit of the contact is 1ms max.
*2. For testing conditions, consult your OMRON sales representative.
Terminals/Appearances (Unit: mm)
Mounting Holes (Unit: mm)
Model
D2F-01 models
D2F models D2F-5 models
Item
0.74 N (Low operating force)
1.47 N (General-purpose) 1.47 N (General-purpose)
Permissible operating speed
Pin plunger models: 1 mm to 500 mm/s,
Lever models: 5 mm to 500 mm/s
Permissible operating
frequency
Mechanical
Pin plunger models: 200 operations/min,
Lever models: 100 operations/min
Electrical 30 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value) 100 mΩ max. 50 mΩ max. 30 mΩ max.
Dielectric strength
Between terminals of the same
polarity
600 VAC 50/60 Hz for 1min
Between current-carrying metal
parts and ground
1,500 VAC 50/60 Hz for 1min
Between each terminal and
non-current-carrying metal parts
1,500 VAC 50/60 Hz for 1min
Vibration resistance * 1 Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Durability 1,000 m/s
2
{approx. 100G} max.
Malfunction * 1 300 m/s
2
{approx. 30G} max.
Durability * 2
Mechanical 1,000,000 operations min. (60 operations/min)
Electrical
100,000 operations
min.
(30 operations/min)
30,000 operations min.
(30 operations/min)
10,000 operations min.
(30 operations/min)
Degree of protection IEC IP40
Ambient operating temperature
-40°C to +85°C (at ambient humidity 60% max.)
(with no icing or condensation)
Ambient operating humidity 85% max. (for +5°C to +35°C)
Weight Approx. 0.5 g (pin plunger models)
●PCB terminals (Straight) ●Self-clinching PCB terminals
<PCB Mounting Dimensions (Reference)>
●PCB terminals (Right-angled) ●PCB terminals (Left-angled)
●Solder terminals ●Compact solder terminals
5.8
±0.15
0.4
1.5
3.5
0.9
5.085.08
12.8
±0.15
6.5
±0.1
3.15
5.8
±0.15
1.6
±0.15
1.5
0.4
±0.05
1.25
±0.15
1.5
3.4
0.9
5.085.08
6.5
±0.1
3.15
12.8
±0.15
5.8
±0.15
3-1.2 dia. holes
5.08
±0.1
12.8
±0.15
5.8
±0.15
2.6
±0.2
0.4
3.1
±0.2
1.5
0.9
5.085.08
6.5
±0.1
3.15
12.8
±0.15
5.8
±0.15
2.6
±0.2
0.4
3.1
±0.2
1.5
0.9
5.085.08
6.5
±0.1
3.15
12.8
±0.15
5.8
±0.15
0.4
1.5
3.5
2.2
1.2
5.085.08
6.5
±0.1
3.15
2
0.5
12.8
±0.15
5.8
±0.15
0.4
1.5
2.4
1.6
5.085.08
3−0.8 dia. holes
12.8
±0.15
6.5
±0.1
3.15
2-2 dia. mounting holes
6.5
±0.15