Datasheet

D2AW Sealed Ultra Subminiature Basic Switch
3
Characteristics
Note: The data given above are initial values.
*1. The values for dielectric strength shown are for models with a Separator.
Refer to your OMRON website.
*2. For testing conditions, consult your OMRON sales representative.
Mounting Structure and Reference Positions for Operating Characteristics (Unit: mm)
Permissible operating speed 30 mm to 500 mm/s (pin plunger models)
Permissible operating
frequency
Mechanical 30 operations/min max.
Electrical 20 operations/min max
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance (initial value) 100 mΩ max.
Dielectric strength *1
Between terminals of the same polarity 600 VAC 50/60 Hz 1min
Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz 1min
Between terminals and non-current-carrying
metal parts
1,500 VAC 50/60 Hz 1min
Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance
Destruction 1,000 m/s
2
max.
Malfunction 300 m/s
2
max.
Durability *2
Mechanical 200,000 operations min. (30 operations/min)
Electrical 200,000 operations min. (20 operations/min)
Degree of protection IEC IP67
Ambient operating temperature -40 to 85°C (at 60%RH max.) (with no icing or condesenation)
Ambient operation humidity 95%RH max. (for +5 to +35°C)
Weight Approx. 0.7 g (for pin plunger models with terminals)
● Without posts
D2AW-A@
● Short post
D2AW-E@
Mounting Hole Dimensions (Reference)
● Long post
D2AW-B@
● M3-screw Mounting Models
D2AW-C@
4
1.7 dia.
FP
OP
TTP
13.3
7
5.3
13.3
3
6.5
FP
OP
TTP
1.7 dia.
5.3
2.6
±0.05
1.5
–0.2
0
8
±0.1
8
±0.1
2.6
2.4
+0.1
0
2.4
+0.1
dia. holes
0
(depth:
D2AW-E@: 1.5 mm min.
D2AW-B@: 5 mm min.)
8±0.1
1.7 dia.
FP
OP
TTP
13.3
6.5
3
5.3
2.6±0.05
5
0
-0.2
FP
OP
TTP
18.5
6
2.65
13±0.1
1.5
0
-0.1
1.5
0
-0.1
5.3
6.5
3.1
+0.13
-0.03
3 dia.
3.3 dia. ±0.15
0
-0.1