Datasheet

ManualsBrandsOmron Electronic Components ManualsMicroswitchesSealed Ultra Subminiature Micro Switch D2AW, 100mA, 1NC, 2N, Hinge Lever

D2AW

Sealed Ultra Subminiature Basic Switch

Long stroke seal switch with

high reliability and high

insulation performance

● <Clipping contact> Double reliability by twin

contacts (=Clipping contact). Foreign materials

are cleaned out by the sliding contacts.

● <Quiet operation> Quiet operating sound by

sliding contact construction is needed for high

grade car.

● <High insulation performance> High performance

of Insulation resistance by unique contact structure.

RoHS Compliant

Model Number Legend

D2AW-

@@@@@

12345 6

1. Mounting Structure

A: Without posts

BR: Long post on right

BL: Long post on left

C: M3-screw mounting model

ER: Short post on right

EL: Short post on left

2. Ratings

0: 0.1 A at 12 VDC

3. Actuator

0: Pin plunger

5: Long straight leaf lever

6: Leaf lever

7: Simulated roller leaf lever

8: Long leaf lever

4. Contact Form

2: SPST-NC

3: SPST-NO

5. Terminals

D: Straight PCB terminals

H: Solder terminals

6. Option Code

Customized Code

Summary of content (8 pages)

PAGE 1
D2AW Sealed Ultra Subminiature Basic Switch Long stroke seal switch with high reliability and high insulation performance ● Double reliability by twin contacts (=Clipping contact). Foreign materials are cleaned out by the sliding contacts. ● Quiet operating sound by sliding contact construction is needed for high grade car. ● High performance of Insulation resistance by unique contact structure.
PAGE 2
D2AW Sealed Ultra Subminiature Basic Switch Due to the idiosyncrasies of the automotive parts industry, a business decision is required on individual items to determine when to start supply. Contact your OMRON representative for information on individual models.
PAGE 3
D2AW Sealed Ultra Subminiature Basic Switch Characteristics Permissible operating speed Permissible operating frequency 30 mm to 500 mm/s (pin plunger models) Mechanical 30 operations/min max. Electrical 20 operations/min max Insulation resistance 100 MΩ min. (at 500 VDC) Contact resistance (initial value) 100 mΩ max.
PAGE 4
D2AW Sealed Ultra Subminiature Basic Switch Terminals (Unit: mm) ● PCB terminals SPST-NO SPST-NC SPST-NO 2-1+0.1 0 dia. 2.5 5.08 2-0.6 2-1.2 0.4 3.5 1.8 4.38 2-0.6 SPST-NC 1.8 4 10.16 0.4 ● Solder terminals SPST-NO 2-2 5.08±0.1 2.5 0.4 2-2 2-1.2 8.76 0.4 SPST-NC holes 2-1+0.1 0 dia. holes 10.16±0.
PAGE 5
D2AW Sealed Ultra Subminiature Basic Switch Dimensions (Unit: mm) / Operating Characteristics The following illustrations and drawings are for solder terminal models. PCB terminal models are omitted from the drawings. Refer to Terminals for these terminals. When ordering, replace @ with the code for the rating that you need. For the combination of models, refer to List of Models. ● Pin plunger D2AW-@00@@ 1.7 dia. 4 Operating characteristics A Operating Force Releasing Force FP OP TTP OF RF 20 2.
PAGE 6
D2AW Sealed Ultra Subminiature Basic Switch Precautions Please refer to "Safety Precautions for All Detection Switches" for correct use. Cautions ●Degree of Protection • Do not use this product underwater. Although molded lead wire models satisfy the test conditions for the standard given below, this test is to check the ingress of water into the switch enclosure after submerging the Switch in water for a given time. Satisfying this test condition does not mean that the Switch can be used underwater.
PAGE 7
MEMO 7
PAGE 8
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.