Datasheet

ManualsBrandsOmron Electronic Components ManualsMiscellaneous Pushbutton SwitchesTrigger Switch 10 mA 42VDC Black

C3AW

Trigger switch for DC Brushless tools

Ensure miniature, dust tight,

vibration resistance,

shock resistance and durability

• C3AW achieves anti-dust (IEC IP6X) by mounting sealed boots

and ultrasonic welding connection between cover cases.

• Strengthen contact shock resistance

(There is not 100

μs or more of chattering within 3,000 m/s

)

• Durability for trigger is 300,000 operations or more

• Wire saving by connecting flat cable AWG#28 directly to the

switch

Model

Note: Order in multiples of minimum packing unit.

Ratings

Note: The above rating values apply under the following test conditions.

(1) Ambient temperature: 20±15°C

(2) Ambient humidity: 65±20%

(3) Operating frequency: 1 sec ON, 4 sec OFF

Approved Safety Standards

UL (UL61058-1)

RoHS Compliant

Model Minimum packing unit

C3AW-1A-8F 50

Rated voltage Resistive load

42 VDC 10 mA

Rated voltage Model C3AW

42 VDC 10 RmA

Be sure to read Safety Precautions on

page 4.

Summary of content (6 pages)

PAGE 1
C3AW Trigger switch for DC Brushless tools Ensure miniature, dust tight, vibration resistance, shock resistance and durability • C3AW achieves anti-dust (IEC IP6X) by mounting sealed boots and ultrasonic welding connection between cover cases.
PAGE 2
C3AW Trigger switch for DC Brushless tools Mechanical Characteristics Mechanical durability Trigger Lever Operation cycle: 300,000 or more, Operating speed and frequency: 400 mm/sec, 60 /min Operation cycle: 50,000 or more, Operating frequency: 60 /min Electrical durability Operating cycle: 200,000 or more, resistance load DC 42 V 10 mA Vibration resistance Double amplitude 1.5 mm, 10 to 2,000 Hz (Vibration acceleration: 200 m/s2 max.
PAGE 3
C3AW Trigger switch for DC Brushless tools Output variation characteristics Variable start voltage G 0.3 V Full speed start voltage J min. 4.8 V * The above output voltage is the voltage between flat cable Nos. 3 and 4 when DC 5 V is applied between flat cable Nos. 2 and 4. [Switch internal connection diagram] (Main switch) 2 (TTP) DC5 V J Flat cable No.
PAGE 4
C3AW Trigger switch for DC Brushless tools Dimensions (Unit: mm) 35.2 (R5) (13°) (23.2) (R13) (13°) 22.5 16 8.5 (31) 0.75 13.5 25 4 dia. 4.5 28.5 25.5 32.7 2 (3.4) 2 8.65 2.5 3.5 (16.8) 85±5 Red line Flat cable · AWG: 28 · Pitch: 1.27 mm · Conductor material: Tinned stranded copper conductor (2.5) 87654321 · Red line on flat cable indicates No. 1. Note: Unless otherwise specified, tolerances in above dimensions are 0.4 mm.
PAGE 5
C3AW Trigger switch for DC Brushless tools Precautions for Correct Use Using Switches • When switches are actually used, unforeseen accidents may occur. Before using a switch, perform all possible testing in advance. • Unless otherwise specified, ratings and performances given in this catalog are for standard test conditions (i.e., +5 to +35°C, and +45% to +85% humidity).
PAGE 6
Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2018 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice.