Datasheet

3
A6SNA6SN
Safety Precautions
■ Correct Use
Soldering
• Set the Switch to OFF before soldering.
• Observe the follwing conditions for reflow soldering.
(Measurement location: Top of Switch)
• The reflow of soldering is principle possible only for one time.
Please contact us about details.
• Manual Soldering
Soldering temperature : 400 °C max.
at the tip of the soldering iron.
Soldering time : 4 s max.
Washing
Apply alcohol-based solvents to clean.
Do not apply water or any other agents to clean, as such agents
may degrade the materials or performance of the Switch.
Packing Specifications
Environment for Storage and Use
To prevent discoloration of the terminals and other problems
during storage, do not store the A6SN in locations subject to the
following conditions.
High temperatures or humidity/Corrosive gases
Direct sunlight/Contact with water
Temperature (°C)
180
150
230
Max.260
Preheating
60 to 120
Max.40
Time (s)
Tape drawing
direction
ON
1
2
5
6
7
8
P=4.0
±0.15
2.0
±0.15
Flat actuator Raised actuator
10
±0.15
E
E
10
±0.15
AB C
D
16
±0.15
1.75
±0.15
No. of poles
2345678910
Dimension
A
24 24 24 24 32 32 44 44 44
B
28.4 28.4 40.4 40.4 40.4
C
7.9 10.4 12.9 15.4 18.0 20.5 22.7 25.5 28.1
D
11.5 11.5 11.5 11.5 14.2 14.2 20.2 20.2 20.2
E
Flat
4.8
Raised
5.8