Datasheet
747
Text
746
Text DIP Switch (Rotary Type) – A6R/A6RV
Low-cost Rotary DIP Switches
■
ROHS compliant.
■
Series includes top-actuated, side-actuated,
flat, and extended-shaft models.
■
The rotor has an O-ring sealed construction
that prevents the ingress of dirt and dust.
■
Two different types of terminal arrangement
are available for each model to allow flexibility
in the circuit design.
Ordering Information
Specifications
■
List of Models
Note: Switches are delivered in units of 48. Orders must be made in multiples of 48.
Type Top-actuated, Top-actuated, Side-actuated, Side-actuated,
flat (White) extended shaft flat (White) extended shaft
(White) (White)
Appearance
No. of Quantity Terminal Output
Positions per stick Arrangement Code
10 48 4 x 1 BCD/hexadecimal A6R-101RF A6R-101RS A6RV-101RF A6RV-101RS
1-2-4-8 code
3 x 3 BCD/hexadecimal A6R-102RF A6R-102RS A6RV-102RF A6RV-102RS
1-2-4-8 code
16 48 4 x 1 BCD/hexadecimal A6R-161RF A6R-161RS A6RV-161RF A6RV-161RS
1-2-4-8 code
3 x 3 BCD/hexadecimal A6R-162RF A6R-162RS A6RV-162RF A6RV-162RS
1-2-4-8 code
■
Rating/Characteristics
Rating 25 mA at 24 VDC
Ambient operating temperature -25 to 70°C, at 60% maximum (with no icing or condensation)
Ambient operating humidity 35% to 95% (for +5° to 35°C)
Insulation resistance 100 MΩ min. (at 250 VDC)
Contact resistance 200 mΩ max. (initial value)
Dielectric strength 250 VAC for 1 minute between terminals of the same polarity
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Malfunction: Approx. 300 m/s
2
Electrical life expectancy 5,000 steps min.
Operating torque 1.96 x 10
-2
N·m max.
Weight 4x1, top-actuated: 0.64 g
3x3, top-actuated: 0.62 g
4x1, side-actuated: 0.8 g
3x3, side-actuated: 0.83 g
(Add 0.13 g for the extended-shaft version of each model.)
DIP Switches
DIP Switch (Rotary Type) – A6C/A6CV
Side Actuated, 10 Positions
A6CV-10R
Side Actuated, 16 Positions
A6CV-16R
Terminal arrangement (top view
)
Rotor
ALL DIMENSIONS SHOWN ARE IN MILLIMETRES.
To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Mounting holes (top view)Internal connections (top view)
Six-0.8-dia. holes (0.9 dia. for automatic insertion)
Rotor (A6CV-jR)
A6C/A6CV Case
7.62±
0.1
8C4
1C2
Installation
■
Internal Connections (Top View)
CAT. No. A053-E2-04A
Omron 08 Cat 565-773 5/10/07 15:58 Page 746