Datasheet

5
2SMPP-03 MEMS Gauge Pressure Sensor
2SMPP-03
Temperature influence of Span voltage (at 0 to 50 kPa) Temperature influence of Offset voltage (at 0 kPa)
Note: 1. Measured points are 0°C, 25°C, 50°C and 85°C at 0 to 50 kPa.
Note: 2. Drive current: 100 µA
Note: 3. These output voltage characteristics are measured with tester without a mounting board.
Note: 4. The output voltage characteristics may be influenced by the mounting board. Be sure to check operation including durability in actual equipment before use.
Pressure Cycle Range ( 0 to 75 kPa)
Note: 1. Tested temperature condition: 25°C
Note: 2. Number of pressure cycle time: 1 × 10
5
Note: 3. Rated cycle pressure: 0 to 75 kPa
Note: 4. These output voltage characteristics are measured with tester without a mounting board.
Temp. Influence of Positive Span Voltage (%FS)
Temperature (˚C)
2
1.5
1
0.5
0
–0.5
–1
10 30 50 70 90–10 20 40 60 800
Temp. Influence of Offset Voltage (%FS)
Temperature (˚C)
3
2.5
2
1.5
1
0.5
0
–0.5
–1
–1.5
–2
10 30 50 70 90–10 20 40 60 800
Offset voltage range (%FS)
Pressure cycle
1
0.5
0
–0.5
–1
50,000 100,0000 75,00025,000
Span voltage range (%FS)
Pressure cycle
1
0.5
0
–0.5
–1
50,000 100,0000 75,00025,000