User's Manual

V740 RFID READER/WRITER, ANTENNA 2005-07, REV.01
OPERATION MANUAL
12 of 45 ©OMRON CORPORATION 2005
To read Tag data;
• Show Raw button displays raw tag data on the
Query page. Each entry shows read count,
protocol, antenna, and tag data.
1. Click the Query link on the navigation menu. The
Query page appears.
2. Select the operating mode from the pull-down list.
3. Click the Start button to begin reading tags.
If there are tags, tag data is displayed. Each entry
shows sequential tag number, number of times
tag was read, tag data, antenna, and protocol.
•
•
•
•
Hide Raw button stops the display of raw tag
data.
Font Size text box decides the character size of
tags read list.It can be applied from 1 to 128.
Clear Output button clears the tags read list
displayed.
4. Click Stop to stop the tag search.
Query Once button initiates a single search cycle.
IMPORTANT: You MUST stop the query before
changing the operating mode or RQL command. If
you do not click STOP before exiting the browser-
based interface, the reader will continue to poll
antennas.
Note: The SELECT clause may be modified.
However changing the SELECT clause may
cause incorrect display of data.
The Query page provides additional options that
enable you to control the data that is gathered and
how it is displayed:
• Bignum checkbox (when checked) displays the
total number of unique tags read. The total is
displayed in large red numbers directly over the
tags read list.This function is not available when
Show Raw screen is displayed.