User's Manual

V740 RFID READER/WRITER, ANTENNA 2005-07, REV.01
OPERATION MANUAL
11 of 45 ©OMRON CORPORATION 2005
Status Page Query Page
The Status page shows the current settings of the
reader.
Use the Query page to monitor reader performance
(read rags). The Query page is useful for verifying
performance when installation is complete and for
troubleshooting performance issues.
The Query field includes a drop-down list (at the
bottom-right of the screen) that enables you to specify
the operating mode. The operating mode specifies the
tag protocols and the maximum number of tags count
to be used in conjunction with the Query page.
Note: The selected settings DO NOT affect reader
performance associated with other applications.
1. Click the Status link in the navigation menu to
display the Status page.
2. Close the browser window if you are finished
using the browser-based interface.
Note: The status of 'Connected Antenna Ports' is
displayed as 'Connected' only for the antennas
connected to the V740 reader when it starts up.
The following operating modes are available for use
with the Query page:
Each mode provides the most suitable time out value
for the protocols and the number of tags to be read.
 less than 10 EPC0 tags
 less than 10 EPC1 tags
 less than 20 total EPC0 and EPC1 tags
 less than 50 EPC0 tags
 less than 50 EPC1 tags
 less than 100 total EPC0 and EPC1 tags
 less than 100 EPC0 tags
 less than 100 EPC1 tags
 less than 200 total EPC0 and EPC1 tags
Note: The modes that contains ISO18000-6B are
not supported in the firmware version 2.0.61.To
confirm the version of the firmware see the status
page.