User's Manual

A
ppendix 1 Accessories
8-2
Appendix 1 Accessories
 
No.
Name
Model Quantit
y
1) Mounting plate (already
attached to the Reader/Writer)
- 2
2) I/O connector plug NJW-2010-PM10 from Nanaboshi Electric Mfg.
Co., Ltd.
１
3) Ferrite core ZCAT3035-1330 from TDK
1
＜Description＞
1) Mounting plate (already attached to the Reader/Writer)
Secure the Reader/Writer by using four M6 screws to .
2) I/O connector plug
Use the I/O connector plug under the following conditions:
Outer diameter of the cable to be used φ8.0 to φ11.0.
For detail information for assemble, refer to 4-6-3-1 Assembly of Host Communications Connector and
I/O Connector.
 3) Ferrite core
Clamp the ferrite core around the wire near the 100VAC of power supply (S82K-03024 from OMRON
recommended). For attachment method, refer to 4-6-1 “Power Supply and Grounding Wires”.
＜Contact＞
Nanaboshi Electric Mfg. Co., Ltd.
49-15, Kamitakada 1-chome, Nakano-ku,
Tokyo 164-0022
TEL: [phone]
FAX: [phone]
＜Contact＞
TDK. Corporation
1-13-1, Nihonbashi, Chuo-ku,
Tokyo, 103-8272
TEL: [phone]