User's Manual

1. Constitution of the Radio Frequency Keyless
Entry
System with Door Lock Controller for vehicle
The radio frequency keyless entry is a system that it controlls locking and unlocking the door
by wireless remote controller. This system consists of two components. The TRANSMITTER is a
device that transmits the signal when the button is pressed. The transmission signal consists of
several synchronous codes, unique identification code, security code and function code. The
RECEIVER is fixed inside the vehicle. It works intermittently to prevent the battery exhaustion.
When the receiver detects the synchronous code, it runs continuously to receive the signals
completely. After receiveing the signal, the receiver decides which operation will be performed. The
user can select the following operations by pressing the button of the remote transmitter.
OPERATION ACTION
LOCK
Lock the door
UNLOCK
unlock the door (the driver side first, then all doors)
PANIC
Beep the horn and flush the small light. (it continues 30 seconds)
This receiver also controls wired operation. It is available to control the door lock status by
using the silcon switch or the remote door control switch (both driver’s and passenger’s side).