User's Manual

1. Constitution of the Radio Frequency Keyless Entry
System with Door Lock Controller for vehicle
The radio frequency keyless entry is a system that it controls locking and unlocking the door by
wireless remote controller. This system consists of two components. The TRANSMITTER is a device that
transmits the signal when the button is pressed. The transmission signal consists of several synchronous
codes, unique identification code, and security code and function code. The RECEIVER is fixed inside the
vehicle. It works intermittently to prevent the battery exhaustion. When the receiver detects the
synchronous code, it runs continuously to receive the signals completely. After receiving the signal, the
receiver decides which operation will be performed. The user can select the following operations by
pressing the button of the remote transmitter.
OPERATION ACTION
LOCK
Lock the door
UNLOCK
Unlock the door (the driver side first, then all doors)
PANIC MODE
Flush the light, flush the small light, and beep the horn.
（it continues 30 seconds）
This receiver also controls wired operation. When the key is in the driver’s side key cylinder, all doors will
Unlock if the key is turned to UNLOCK and hold more than one second. In case of the operation time is shorter,
the only driver’s side door is mechanically unlocked. It is also available to control the door lock status by using
the remote door control switch (both driver’s and passenger’s side).
Transmitter
f =315.1MHz
-1-
-