User Manual

step 1 步骤一
!
注意
CAUTION
止推轴承及横轴垫圈属于飞行消耗品，建议每 躺定期检查及更换，高主旋翼
转速飞行时，请缩短定期检查之趟数，以确保飞行安全。
横轴避震套
( Ø2.95xØ5.95x2.9mm)x2
(OUT)
内径较小
内径较大
(IN)
止推轴承(Ø3xØ6x2.8)
!
注意
CAUTION
原装组装完成品，每一次飞行前请先确认螺丝是否已上胶不会松动。
滚珠轴承(Ø3xØ6x2.5mm)x2
主夹头轴承衬套(Ø3.1xØ4.3x1.9mm)x2
平面轴承垫片(Ø4xØ6x0.1mm)x2
!
注意
CAUTION
垫片(Ø3.1xØ4.5x0.6mm)x2
垫片(Ø2.1xØ5x0.2mm)x2
Grease
6
EN
WWW.OMPHOBBY.COM
圆头内六角螺丝(M2x6mm)x2
Ball Bearing-MR63ZZ
Main collet bearing bushing
Flat bearing gasket
Thrust bearing
Thrust braring and washer for radial bearing are wear items,and thus should be
inspected for replacement after every 20 flights.
For flights with high headspeed ,the inspection interval should be reduced to
ensure flight safety.
Washer
Socket screw
Damper rubber-red
Washer
Thrust bearing
止推轴承(Ø3xØ6x2.8mm)
Thrust bearing
平面轴承垫片(Ø4xØ6x0.1mm)
Flat bearing gasket
滚珠轴承(Ø3xØ6x2mm)
Ball Bearing-MR63
滚珠轴承(Ø3xØ6x2.5mm)
Ball Bearing-MR63ZZ
主夹头轴承衬套(Ø3.1xØ4.3x1.9mm)
Main collet bearing bushing
轴承面凹开口朝内
Grease
Obverse of bearing faces inside.
金属主旋翼固定座
横轴Ø5x38.9mm
Feathering shaft
垫片(Ø3.1xØ4.5x0.6mm)
Washer
Damper rubber
Grease
Washer
垫片
Ø2.1xØ5x0.2mm
圆柱头内六角螺丝
M2x6mm
Socket screw
!
注意
CAUTION
铜套台阶端面朝轴承方向
Pay attention to the direction
of the copper washer
塑胶主旋翼夹座
塑胶主旋翼夹座
止推轴承(Ø3xØ6x2.8)
横轴避震套
Ø2.95xØ5.95x2.9mm
滚珠轴承(Ø3xØ6x2mm)x2
Ball Bearing-MR63