User`s manual

10355625_V_1_0.DOC
22/35
2-way stereo operation with mono-subwoofer
Most common setting in discotheque appliances. Phase erasions in the bass-range can be avoided and the
system gains around 3 dB in the bass-range.
Activate the stereo mode via the MODE switch on the rear panel.
Example for setting the frequency ranges (depending on the system and the room):
Bass Highs
40 Hz - 250 Hz 250 Hz - 20 kHz
The frequency can be adjusted via the LOW/HIGH XOVER Frequency Control, depending on the XOVER
Frequency Switch between 45 Hz and 950 Hz or between 450 Hz or 9,5 kHz (LED lit).
With the Input Level Control, you can adjust the incoming signal level from - ∞ to +6 dB.
With the Low Level and High Level Controls, you can attenuate the respective output level from - ∞ to +12
dB. In the stero mode, both channels should be adjusted the same way.