User manual

00047147.DOC, Version 1.0
23/30
19 Connection player mechanism unit
Jack for connecting the player mechanism unit via the
supplied mini DIN connection cable.
12 Button REPEAT
For selecting the repeat functions.
• First actuation of the button (indication REPEAT 1):
continuous repeat of the title selected.
• Second actuation of the button (indication REPEAT
ALL): continuous repeat of all titles.
13 Slide control PITCH
Sets the playback speed up to ±24 %. Slide it up to
decrease the pitch, slide it down to increase the pitch.
The adjustment of the control is effective only with the
button PITCH
activated. The pitch percentage is
indicated on the display.
14 Buttons for selecting titles
• : Each time the button is pressed, the unit will
advance one title.
•
: By pressing the button, the unit will go to the
beginning of the title and with each further actuation,
the unit will go back another title.
•
+10: By pressing the button, the unit will advance 10
titles.
15 Button
Switches between play and pause. During playback the
blue LED lights, in pause mode it flashes.
16 Buttons IN, OUT, RELOOP
Buttons to memorize and replay a seamless continuous
loop.
•IN: sets the starting point of a loop (LED lights blue)
•OUT: defines the end point of a continuous loop which
is instantly started (LEDs IN and OUT light). The loop
will continue to play until the button OUT is pressed
once again.
• RELOOP: starts the loop once again
17 Button TIME
For switching over the time indication:
• basic setting: elapsed title time (ELAPSED)
• first actuation: remaining title time (REMAIN)
• third actuation: total remaining time (TOTAL REMAIN)
18 Button SINGLE
This button determines the operating mode.
• Basic setting: continuous play of all titles of the CD
• First actuation: single title play (indication "SINGLE");
after playing a title, the unit is set to pause at the start o
f
the next title