User`s manual

10355565_V_1_0.DOC

22/30

There are no servicable parts inside the device except for the fuse. Maintenance and service operations are

only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply

cable available at your dealer.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

System specifications:

Power supply: 230 V AC, 50 Hz ~

Power consumption: 10 W

Fuse: T 0.5 A

Audio inputs/outputs: XLR, jack, screw terminals

Input impendance: 10/20 kOhms (unb./bal.)

Output impendance: 300/150 kOhms (unb./bal.)

Frequency response: 20 Hz - 20 kHz, ±3 dB

S/N ratio: > 95 dB, unweighted

Crosstalk: > 90 dB

Distortion: < 0.01 %

Frequencies: 25/40/63/100/160/250/400/630Hz/1k/1.6k/2.5k/4k/6.3k/10k/16 kHz

Equalizer section:

Frequency: variable (20 to 2 kHz)

Q (Quality): variable (30 to 3)

Control range: ±6 dB or ±15 dB

Low Cut: 30 Hz

Compressor section:

Threshold: variable (-40 to +22 dBu)

Ratio:

variable (1:1 to ∞:1)

Attack time: variable (0.1 ms to 100 ms)

Release time: variable (0.1 sec to 2.5 sec)

Output:

variable (-∞ to +6 dB)

Display:

Gain Reduction: VU Meter, 7 LEDs

Dimensions/Weight:

Dimensions (WxDxH): 483 x 210 x 44 mm

Weight: 3 kg