User`s manual

00042994.DOC, Version 2.0
23/33
17 Talkover on/off
On/off switch for the talkover function. With the button
pressed (blue LED lights), the levels of the channels 1-4
are automatically attenuated by 15 dB when
announcements are made with the DJ microphone.
18 Channel faders
Level controls for the channels 1-4.
19 Master fader
Level control for the master channel 1.
20 Selector switch CUE MODE
For selecting the monitoring mode for the headphones
output:
• SPLIT (button pressed, red LED lights): The prefade
r
level (mono) is on one side and the output signal (mono)
is on the other side of the headphones.
• MIX (button released, blue LED lights): A mixed signal
of prefader level and master signal is on both sides o
f
the headphones.
21 Level control CUE LEVEL
Level control for the headphones output.
22 Fader CUE MIXING
For selecting and crossfading the monitoring signal fo
r
the headphones output:
• left position CUE: The prefader level of the input
channel of which the button CUE is pressed is
monitored.
12 Balance control
Determines the signal level at the left and right maste
r
j
acks.
13 Control MASTER 2
Level control for the master channel 2.
14 Buttons CUE
Buttons for monitoring the input channels 1-4 ahead o
f
the respective channel fader via headphones connected
to the jacks PHONES. With the button pressed, the blue
LED lights to immediately indicate that a channel is
monitored.
15 Tone controls
3-band equalizer for the channels 1-4: TREBLE,
MIDDLE, BASS.
16 Microphone channel on/off
On/off switch for the DJ microphone channel. With the
button pressed (red LED lights), the DJ microphone is
switched on.