User`s manual

ManualsBrandsOmnitronic Manualsaudio & home theatreCOMBO-70

00025663.DOC, Version 1.1

29/29

9.1 Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

rocedure:

Step 1: Unscrew the fuseholder on the rear panel with a fitting screwdriver from the housing (anti-

clockwise).

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing and fix it.

9.2 Loudspeakers

If the speaker-system distorts, one of the loudspeakers may be defective. Test the speaker-system once

more with another amplifier. If the sound remains distorted, the speaker-system should not be operated any

more in order to prevent further damage. Please contact your dealer.

If clacking sounds are heard from the speaker-system, screws may have loosened due to the continuous

vibrations. The speaker-system should be checked by a specialist. Especially for public use, the speaker-

system should be checked before every operation so that the speaker-system and the speakers in the

systems are always well fixed.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply

cable available at your dealer.

Should you have further questions, please contact your dealer.

10. TECHNICAL SPECIFICATIONS

General:

Power supply: 230 V AC, 50 Hz ~

Power consumption (max.): 150 W

Dimensions: 480 x 240 x 140 mm

Weight: 7 kg

Control unit:

Inputs:

4 mono XLR or balanced 6.3 mm jacks

1 stereo RCA

1 Aux-Return balanced 6.3 mm jack

Outputs:

2 Speaker Out Speaker

1 Aux-Send balanced 6.3 mm jack

Speaker-system:

Rated power: 100 W RMS

Program power: 150 W

Components: 25 cm woofer (10"), 2.5 cm horn (1")

Sensitivity (1 W/m): 95 dB

Impedance: 8 ohms

Frequency range: 50 Hz - 18 kHz

Dimensions: 450 x 335 x 240 mm

Weight: 9.5 kg (piece)

Amplifier:

Nominal power output: 75 W RMS / 4 ohms

Maximum power output: 150 W / 4 ohms

Distortion: 0.05 %

S/N-ratio: >90 dB

Frequency range: 20 Hz - 20 kHz