Datasheet

65
www.omnitronic.de
Delivery, technical changes, errors and omissions exempted. Please take notice of the user manuals and latest information which can be downloaded from our site. All pictures are similar and partially symbolic.
Power Amplifiers
OMNITRONIC MCP 4-channel amplifier No. 10452410 .......................................................................MCP-4150
No. 10452420 .......................................................................MCP-6150
No. 10452430 .......................................................................MCP-8150
4-channel PA amplifier with integrated limiter 4 x 150 W/4 ohms
• 4/6/8 x 150 W/4 ohms
• For multi-zone applications
• Integrated limiter
• High pass filter/low pass filter
OMNITRONIC MCP-4600 4-channel amplifier No. 10452460 ...................................................................... MCP-4600
4-channel PA amplifier 4 x 600 W/4 ohms
• For multi-zone applications
• Complete protection set
• Adjustable low pass/high pass filter
Technical specifications:
Device: MCP-4150 MCP-6150 MCP-8150 MCP-4600
Power supply: 115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~ 230 V AC, 50 Hz ~
Power consumption (max.): 900 W 1400 W 1850 W 2100 W
Power output sine: 180 W 300 W 300 W
4 ohms: 4 x 150 W 6 x 150 W 8 x 150 W 4 x 650 W
8 ohms: 4 x 100 W 6 x 100 W 8 x 100 W 4 x 400 W
8 ohms bridged: 2 x 300 W 3 x 300 W 4 x 300 W 4 x 1250 W
Frequency range: 22 - 25000 Hz 22 - 25000 Hz 22 - 25000 Hz 20 - 20000 Hz
Damping factor: >200 >200 >200 >150
Distortion factor: 0.01 % 0.01 % 0.01 % 0.05 %
SN ratio: 102 dB 97 dB 90 dB 95 dB
Channel separation (at 1 kHz): 61 dB 51 dB 51 dB
Slew rate: >30 V/µsec >30 V/µsec 0.77 V 0.775 V
Min. input sensitivity: 0.77 V 0.77 V >30 V/µsec
Input impedance: 12 kohms (unbalanced), 22 kohms (balanced) 12 kohms (unbalanced), 22 kohms (balanced) 12 kohms (unbalanced), 22 kohms(balanced) 20 kohm (balanced), 10 kohm (unbalanced)
Input connectors: 4 x XLR female, 4 x terminal block 6 x XLR female, 6 x terminal block 8 x XLR female, 8 x terminal block 4 x balanced XLR connectors
Output connectors: 4 x terminal block 6 x terminal block 8 x terminal block 4 x screw connectors
Control elements:
Power switch, level control per channel, crossover
on/off per channel, high/low pass per channel, mode
switch (stereo/bridged)
Power switch, level control per channel, crossover
on/off per channel, high/low pass per channel, mode
switch (stereo/bridged)
Power switch, level control per channel, crossover
on/off per channel, high/low pass per channel,
mode switch (stereo/bridged)
Power switch, Input attenuators (per channel), Low
pass (two channels), High pass (2 channels)
Indicators: Level with clip per channel, bridged Level with clip per channel, bridged Level with clip per channel, bridged Overheat, overload, short-circuit, DC, softstart
Protection circuits:
Softstart, short-circuit, overheat, overload and DC
voltage
Softstart, short-circuit, overheat, overload and
DC voltage
Softstart, short-circuit, overheat, overload and
DC voltage
Power, Bridge, Protect, Clip, Signal
Construction: Steel chassis with aluminum front panel Steel chassis with aluminum front panel Steel chassis with aluminum front panel Steel chassis
Dimensions: 310 x 482 x 132 mm 310 x 482 x 132 mm 310 x 482 x 132 mm
482 x 490 x 90 mm, Rack installation with 2 u
Minimum mounting depth: 320 mm 320 mm 320 mm 510 mm
Weight: 16 kg 17.5 kg 19 kg 28 kg