User manual

00053693.DOC, Version 1.1
30/32
C. Adjusting the delay time
In case of differences in running time for different speaker distances, a signal delay (delay time) can be
selected in milliseconds.
1 C
all menu item Delay.
2 By turning the rotary press control DATA you can adjust the delay time between 0 ms and 7 msec.
D. Switching on filters
To ensure that the speakers connected only receive signal parts they are specialized to reproduce, a low
pass or high pass filter can be switched on for each output, i.e. the signal is split between the bass speakers
and the mid-high range speakers.
1 Call menu item LowPass or HighPass.
2 Turn the rotary press control DATA to adjust the crossover frequency between 20 Hz and 20,000 Hz or
deactivate the filter with the position Off. Press the control to confirm your selection.
3 The menu item type (filter characteristics) is called. By turning the rotary press control select from the
list of various filter characteristics (Butterworth, Bessel, Linkwitz-Riley) with different slopes.
E. Equalizer adjustments
To process the sound of the input signals 7 parametric equalizers PEQ 1 to 7 to be combined are available.
1 Call the menu items PEQ 1 to 7 one after the other.
2 By turning the rotary press control DATA you can adjust the degree of frequency boost or cut between
-12 dB and +12 dB. Press the control to confirm your selection.
3 The menu item Q (Q-factor) is called. By turning the rotary press control you can adjust the bandwidth
of the filer between 0.2 and 25. Press the control to confirm your selection.
4 The menu item Freq (frequency) is called. Finally, adjust the cutoff frequency, at which the filter starts
working between 20 Hz and 20,000 Hz.