User manual

10060200_V_1_0.DOC
24/33
4.3 Connections
AUX SEND/RETURN
Connect your effectors or monitor system/zone system with
the AUX SEND-sockets.
AUX is POST-fader and can be used for your effectors. You
can adjust the signal level for the AUX SEND-socket via the
AUX SEND-control.
Signal returns from the effector can be inserted via the AUX
RETURN-socket. The signal level of the AUX RETURN-
socket can be adjusted via the Return-control.
PHONES
Connect your headphones with the PHONES-socket.
TAPE IN/TAPE OUT
For recording, connect your tape recorder or cassette deck to
the TAPE OUT-sockets. The TAPE OUT level will not be influenced by the Main Mix fader. You can set the
output level with the channel faders, the tone controls and the GAIN control.
You can insert the tape-signal via the TAPE IN-sockets. You can activate the Tape-signal via the TAPE ON-
switch.
MAIN OUT
Connect the main output either via two jack plugs or the
balanced XLR-plugs.
GROUP OUT
Via the GROUP OUT-sockets, you can connect the group
signal with a headphones amplifier, e.g. for the background
singers. You can adjust the signal level via the group fader.
R
L
L
TAPE
R
TAPE ON
TAP E IN
TAP E OUT
SEND
RETURN
AUX
PHONES
MAIN LEFT
MAIN RIGHT
GROUP OUT
G1 G2