User manual

10060200_V_1_0.DOC

22/33

MIC

LINE

L/MONOL/MONO

INSERT

45-6

7-8

STEREO STEREO

At the mono input channels, the microphone signals are connected via the XLR-sockets, the line-signals via

the jack sockets.

Please note: you must only connect one kind of signal to a mono channel – either mic or line.

You can also run a stereo channel in mono when you only connect the left input socket.

MIC

Here, you can connect condenser microphones or dynamic microphones via balanced XLR-cables. For

condenser microphones, you can activate the phantom power via the +48V-switch. Please respect the

warnings under +48V-switch.

Occupation balanced XLR-connection:

Balanced use with XLR connectors

1 = Ground / Shield

2 = Hot (+)

3 = Cold (-)

For unbalanced use pin 1 and pin 3 have to be bridged

Input Output

LINE

Here, you can connect the line-signals via balanced or unbalanced jack plugs.

Please note: Never activate the phantom-power when connection unbalanced jack plugs. The voltage

between the pins may lead to severe damage!

Occupation jack plug: