Datasheet

ordering inFormation
Page 4
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [e-mail] • 140 Technology Dr., Irvine, CA 92618
iConverter XG and XG+
Trademarks are owned by their respective companies. iConverter and NetOutlook are registered trademarks of Omnitron Systems Technology, Inc.
©2011 Omnitron Systems Technology, Inc. All rights reserved. Specications subject to change without notice.
091-18599-001G 7/11
8 5 9 9 x - x x - x x
<Blank> Standard Operating Temperature Range Model
W Wide Operating Temperature Range - XG Models Only
Z Extended Operating Temperature Range - XG Models Only
<Blank> Plug-in Module
A Tabletop with External US AC Power Supply
B Tabletop with External Universal AC Power Supply
C Tabletop with DC Terminal Power
D Wall-Mount with External US AC Power Supply
E Wall-Mount with External Universal AC Power Supply
F Wall-Mount with DC Terminal Power
Accessories
7499-DC-1 10Gigabit SFP+ Direct Attach Cable (Twinax) 1m
7499-DC-3 10Gigabit SFP+ Direct Attach Cable (Twinax) 3m
Order the appropriate SFP+/XFPs separately.
For standard wavelengths: See Optical Transceiver Data Sheet for available transceivers and optical specications.
For CWDM wavelengths: See CWDM Optical Transceiver Data Sheet for available transceivers and optical specications.
10GIgabit Protocol Transparent
Media Converter
Port
Conguration
iConverter XG iConverter XG+*
Port 1 Port 2
SFP+ SFP+ 8599-00 -
SFP+ XFP 8599-01 8599N-01
XFP XFP 8599-11 8599N-11
* Refer to XG+ application note on installation requirements
iConverter XG
<Blank>
iConverter XG+
N
ordering guidelines
SFP+ XFP Requirements XG XG+
(2) Power Level 1 or 2 SFP+ X X
(2) Power Level 1 or 2 XFP X X
(1) Power Level 3 XFP* X X
(2) Power Level 3 XFP X
(1) or (2) Power Level 4 XFP X
Tunable XFPs X
SFP+ XFP Power Requirements
Power Level 1 up to 1.0 watts
Power Level 2 up to 1.5 watts
Power Level 1 up to 1.5 watts
Power Level 2 1.5 to 2.5 watts
Power Level 3 2.5 to 3.5 watts
Power Level 4 3.5 to 5.5 watts
XG/XG+ Transceiver Guidelines
Typical SFP+/XFP Power Levels
Based on the installed XFP transceivers, use the tables below to determine the correct model:
The XG+ requires specic chassis and installation congurations. Please contact Omnitron for more information.
XG supports a combination of transceivers up to 6.0 watts.
XG+ supports a combination of transceivers up to 11 watts
* Where the other transceiver has a lower power requirement.