Leaflet

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [e-mail] • 140 Technology Dr. Irvine, CA 92618
© 2010 Omnitron Systems Technology, Inc. All rights reserved. FlexPoint is a Trademark of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specications are subject to change without notice.
091-04340-004E 9/10
In this enterprise campus application example, FlexPoint
10/100 media converters are installed in a 14-Module
Redundant Power chassis for high-density ber distribution
from UTP switch equipment at the Network Core. A UTP
workgroup switch (A) is connected via ber with a standalone
FlexPoint 10/100 media converter. Another FlexPoint 10/100
converts the ber to UTP in a ber-to-desktop application
(B). An Ethernet switch (C) is connected directly via ber
to the FlexPoint module at the Network Core. In all cases,
multimode or single-mode ber can be used, and ber links
can be extended up to 120km using single-mode ber.
sPeCIFICatIONs
aPPlICatION examPle
OrderINg INFOrmatION
Model Type 10/100
Protocols IEEE 802.3, 10BASE-T, 100BASE-TX, 100BASE-FX
UTP Cable EIA/TIA 568A/B, Category 5 and higher
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
UTP Connectors RJ-45
Fiber Connectors SC, ST, MT-RJ, LC
Switches
User Selectable UTP Crossover, AN/Man,
10/100UTP, UTP FDX/HDX, Fiber FDX/HDX
LED Displays
Power: Yellow LED = Power Applied
UTP AN: Green LED = Auto Negotiation Enabled
UTP Duplex: Green LED
On: Set to Full-Duplex
Off: Set to Half-Duplex
UTP Link/Receive: Green LED = Device Present
UTP 10Mbps: Yellow LED = Data Received
UTP 100Mbps: Green LED = Data Present
Fiber Duplex Mode: Green LED = Device Present
On: Set to Full-Duplex
Off: Set to Half-Duplex
Fiber Link/Receive: Green LED = Device Present
Dimensions W: 3.0" x D: 4.0" x H: 1.0"
Weight 6 oz. (without power adapter)
Compliance UL, CE, FCC Class A
Power
Requirements
Nominal Voltage:
Voltage Range:
Power Nominal:
Maximum Power:
Barrel Connector
9VDC
6.0 to 15.0VDC
0.5A @ 9VDC
1A @ 9VDC
Molex Connector
5VDC
4.75 to 5.25VDC
0.8A @ 5VDC
1A @ 5VDC
Temperature
Standard Operating: 0 to 50 °C
Wide Operating: -40° C to 60° C
Extended Operating: -40° C to 75° C
Storage: 40° C to 80° C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (Hours)
Module without Power Adapter: 1,100,000
Module with Power Adapter -1: 250,000
Module with Power Adapter -2: 100,000
Fiber Type Distance
Connector Type Tx / Rx
Wavelength
[nm]
Min. Tx
Power
[dBm]
Max. Tx
Power
[dBm]
Min. Rx
Sense
[dBm
Max. Rx
Power
[dBm]
Optical
Power
Budget
ST SC MT-RJ LC
MM 5km 4342-x 4340-x 4346-x 4355-1x 1310 -24 -14 -31 -14 7
SM 30km 4343-x 4341-x 4348-x 4355-2x 1310 -15 -8 -31 -8 16
SM 60km 4345-x 4344-x - 4355-3x 1310 -5 0 -31 -3* 26
SM 120km - 4349-x - 4355-4x 1550 -5 0 -31 -3* 26
SM/SF 20km - 4357-1x - - 1310/1550 -15 -5 -30 -3 15
SM/SF 20km - 4357-2x - - 1550/1310 -15 -5 -30 -3 15
For wide temperature (-40 to 60º C), add a ""W"" to the end of the model number. Consult factory for extended temperature (-40 to +75º C) models.
Power Adapter Kits (-x): -0 = No power adapter included -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no power cord).
Contact Omnitron for other ber options and operational temperature ranges.
*When using these models in pairs, minimum attenuation of 3dB is required.