Leaflet

FlexPoint
FlexPoint
TM
FlexPoint 10/100
10/100 UTP to Fast Ethernet Fiber Media Converter
The FlexPoint 10/100 is a modular 10BASE-T or 100BASE-
TX UTP to 100BASE-FX ber media converter that provides
reliable and cost-effective network connectivity and ber
extension.
The FlexPoint 10/100 features a 10/100 auto-sensing UTP
port that adjusts to the highest level of performance supported
by the attached device. An override switch provides manual
control over the 10/100 operation of the UTP port and the Half/
Full-Duplex operation of both the ber and UTP ports.
Using its store-and-forward technology with 1-Mbyte buffer
memory, the FlexPoint 10/100 checks all packets and discards
illegal or corrupted packets providing fragment-free packet
forwarding.
It features a crossover switch facilitates connectivity to network
equipment such as hubs, switches and workstations.
The ber port operates at 1310nm or 1550nm and features
SC, ST, LC or MT-RJ connectors. Multimode ber models
support distances of up to 5km, and single-mode ber models
support distances of up to 120km.
Manual switch settings and LED indicators with on-the-label
descriptions enable easy conguration to legacy devices
or specific network requirements. The LEDs report the
availability of power, port activity and link status, speed and
duplex modes.
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
can also be rack-mounted in a 5-Module shelf or in a high-
density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used
as standalone devices can be powered by an external AC to
DC power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options
provide exible upgrade paths as network requirements
change and grow.
FlexPoint unmanaged media converters are easy to use
and provide dependable ber connectivity in Enterprise and
Government networks around the world.
The FlexPoint 10/100 is a 10BASE-T or 100BASE-TX to ■
100BASE-FX ber media converter
The UTP port supports auto or manual negotiation ■
Extends network distances up to 120km ■
Supports most network interfaces with a wide variety of ■
cable and connector types
Labeled status LEDs and switches for quick and easy ■
installation
Features a crossover switch for connection to hubs, ■
switches or workstations
Wall-mount or rack-mount on a 5-Module shelf or in ■
a 14-Module power-redundant FlexPoint Powered
Chassis
Completely software independent with no installation of ■
drivers required
Standard (0 to +50°C), wide (-40° to +60°C) and ■
extended (-40°C to +75°C) temperature ranges
Peace-of-mind reliability backed by a lifetime warranty ■
and free 24/7 technical support
Key Features