Datasheet

Page 2
speciFications
miConverter S-Series
application example
Model miConverter S/GXT miConverter S/FXT
Description
1000BASE-X Fiber to
10/100/1000BASE-T UTP Converter
100BASE-FX Fiber to
10/100/1000BASE-T UTP Converter
Protocols
10BASE-T, 100BASE-TX, 1000BASE-T,
1000BASE-X
10BASE-T, 100BASE-TX, 1000BASE-T,
100BASE-FX
Frame Size 10,240 byte max frame size
Compliance UL, CE, FCC 15 Class B
UTP Cable EIA/TIA 568A/B, Cat 5 and higher
Fiber Cable
Multimode:
Single-mode:
50/125, 62.5/125, 100/140um
9/125um
Copper Connector RJ45
Fiber Connector
SFP:
Dual Fiber:
Single-Fiber:
LC
SC, ST
SC
LED Display Pwr, F/O, UTP
Dimensions W: 1.75” x L: 2.25” x H: 0.84”
Weight
without power adapter:
with USB cable:
with AC power adapter (US) and USB:
2.5 oz.
3.8 oz.
5.42 oz.
DC Power Input
Connector
USB micro-B
DC Power
Requirements
0.5A @ 5VDC
AC Power
Requirements (US)
100-120VAC
50-60Hz
0.02A @ 120V
AC Power
Requirements (Univ.)
100-240VAC
50-60Hz
0.02A @ 120VAC
Temperature
Standard:
Wide:
Storage:
0 to 50°C
-40 to 65°C
-40 to 80°C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs)
without power adapter:
US power adapter:
Univ power adapter:
1,300,000
50,000
200,000
The application diagram depicts a laptop computer connected
to a ber network.
The miConverter S-Series media converter connects to
the laptop using two cables. The USB Power Cable draws
electrical current from the USB port (1.0 or 2.0) of the laptop.
The UTP cable provides connectivity between the laptop and
the copper port on the converter. The converter provides
10/100/1000BASE-T UTP to a 1000BASE-X or 100BASE-FX
ber conversion, which can extend the ber link up to 140km.
Power from the USB port of the computer is automatically
shut off when the computer is powered down, turning off the
media converter.
The miConverter S-Series media converter is an excellent
solution for ber-to-the-laptop applications where Gigabit ber
connectivity is required and local power is not available.