iConverter User Manual

PI SA
802.3ah Control - iConverter GX/TM2 iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 7 Model Number = 8939N-0 Port = 1
1: 802.3ah OAM State Enabled Local Status
2: OAM Mode Active Discovery State Incomplete
3: Loopback Mode Disabled Multiplexer State Forward
4: Loopback Timeout 30 sec Parser Action Forward
5: Unidirectional Mode Disabled
Remote Status
Discovery State Incomplete
Critical Event No
Link Fault No
Multiplexer State Unknown
Parser Action Unknown
Mode Unknown
Supports Unknown
OUI: Unknown
Enter, Previous Screen (0), (n)ext page, (H)elp, E(x)it >
To configure the 802.3ah parameters for the UTP port, type an n and press <ENTER>.
4.2.6 802.3ah Events
802.3ah events can be accessed by selecting options 6 from the Port configuration screen.
PI SA
802.3ah Event - iConverter GX/TM2 iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 1 Model Number = 8923N-1
Port 1
1: Symbol Period Window 0 second < 0 symbols>
2: Symbol Period Threshold 0 symbols
3: Frame Window 0 seconds
4: Frame Threshold 0 frames
5: Frame Period Window 0 second < 0 frames>
6: Frame Period Threshold 0 frames
7: Frame Seconds Summary Window 0 seconds
8: Frame Seconds Summary Threshold 0 seconds
Port 2
9: Symbol Period Window 0 second < 0 symbols>
10: Symbol Period Threshold 0 symbols
11: Frame Window 0 seconds
12: Frame Threshold 0 frames
13: Frame Period Window 0 second < 0 frames>
14: Frame Period Threshold 0 frames
15: Frame Seconds Summary Window 0 seconds
16: Frame Seconds Summary Threshold 0 seconds
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 35