iConverter User Manual

Page 22
When the upload is complete, the GX/TM2 displays the update status and then automatically restarts with
the newly loaded firmware.
3.4.4.4 Updating the GX/TM2 Firmware via FTP
Using an FTP application, upload the new firmware into the FTP root directory of the GX/TM2. When the
file transfer is complete, the GX/TM2 verifies the file and then automatically restarts with the newly loaded
firmware.
For detailed instructions on updating the management modules and other modules in the same chassis via
FTP, download the application note “iConverter Management: Updating Modules via FTP” available on
Omnitron’s web page:
http://www.omnitron-systems.com/downloads.php
To configure FTP, see Setting GX/TM2 Passwords Section 3.4.1.4.