iConverter User Manual

Page 20
3.4.4 Access the GX/TM2 Remotely
Remote access to the GX/TM2 is provided via SNMP, Telnet, FTP or an external serial modem connected
to the Serial Console Port.
3.4.4.1 Accessing the GX/TM2 via NetOutlook (SNMP)
The GX/TM2 module can be remotely accessed by SNMP-client software such as NetOutlook or third-
party SNMP management software. See Setting SNMP Preferences Section 3.4.2, on how to configure the
required parameters.
NetOutlook Chassis View and Trap Log Screens
3.4.4.2 Accessing the GX/TM2 via Telnet
The GX/TM2 is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It
is highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences screen, option 6.