Media Converter and Network Interface Device User Manual

4.3.9 Port Statistics
The 2GXM module provides port statistics on both Port 1 and Port 2.
The Port Statistics can be viewed by selecting option P from the Module configuration screen.
PI
Module - iConverter 2GXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Switch ON condition OFF condition H/W Actual
Slot Number = 11 1: Port 1 Manual Port 1 AN Off Off
Model Number = 8999-0 2: Port 2 Manual Port 2 AN Off Off
3: Not Available
Serial Number = xxxxxxxx 4: Not Available
Manufacturing Date = xxxxxxxx 5: Not Available
Product Revision = xx 6: Link Propagate Link Segment Off Off
Software Revision = xx 7: Remote Fault Normal Off Off
8: Symm Fault Det Normal Off Off
LED 9: BP A Enabled BP A Disabled Off Off
1: Power = On 10: BP B Enabled BP B Disabled Off Off
2: Power Supply 1 = Off 11: Pause Enabled Pause Disabled Off Off
3: Power Supply 2 = Off 12: Slave Only Master/Slave Off Off
4: Power Supply 3 = Off 13: Not Available
5: Port 1 Link = Off 14: Not Available
6: Not Available 15: Not Available
7: BP Master = Off 16: Not Available
8: Port 2 Link = Off OAM settings:
9: Not Available 17: IP protocol State On
18: Management Mode Secure OAM
Toggle Switch(1-16), (I)dentifier, (R)eset, (H)elp, (P)ortStat, Port(C)tl > P
PI SA
Port Statistic
Module - iConverter 2GXM iConverter, Serial Agent
Identifier -
Chassis Number = 1
Slot Number = 1
Model Number = 8999-0
Port Statistics
-------------------------------------------
Port 1 Port 2
Rx Bytes 0 0
Rx Packets 0 0
Rx Total Packets 0 0
Tx Bytes 0 0
Tx Packets 0 0
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
To refresh the Port Statistic screen, press <ENTER>.
Page 41