- Omnitron Systems Technology, Inc. Media Converter and Network Interface Device User Manual

Port VLAN is access by selecting options 13 - 22 or 13 - 15 depending on the module type; plug-in or

standalone.

Module - iConverter 2FXM2 iConverter, Serial Agent

Identifier -

Chassis Number = 1 Port Access Control Setup

Slot Number = 1 ----------------------------------

Model Number = 8959N-0 11: Port 1 Enable On

12: Port 2 Enable On

Feature Selection

---------------------------------- Port VLAN Path Setup

1: 802.1Q Processing Enable Off ----------------------------------

13: Port 1 to Port 2 Enable On

2: Configure Tag VLAN Control 14: Port 1 to BP A Enable On

3: Configure VLAN Membership 15: Port 1 to BP B Enable On

4: Save TAG VLAN parameters 16: Port 2 to BP A Enable On

5: Configure 802.3ah parameters 17: Port 2 to BP B Enable On

6: Configure 802.3ah events 18: BP A to BP B Enable On

7: SFP Information 19: Port 1 to Mngmnt Enable On

8: Bandwidth Control 20: Port 2 to Mngmnt Enable On

9: L2CP Control 21: BP A to Mngmnt Enable On

10: cNode Loopback 22: BP B to Mngmnt Enable On

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Module - iConverter 2FXM2 iConverter, Serial Agent

Identifier - Host

Chassis Number = 1 Port Access Control Setup

Slot Number = 1 ----------------------------------

Model Number = 8959N-0 11: Port 1 Enable On

12: Port 2 Enable On

Feature Selection

---------------------------------- Port VLAN Path Setup

1: 802.1Q Processing Enable Off ----------------------------------

13: Port 1 to Port 2 Enable On

2: Configure Tag VLAN Control 14: Port 1 to Mngmnt Enable On

3: Configure VLAN Membership 15: Port 2 to Mngmnt Enable On

4: Save TAG VLAN parameters

5: Configure 802.3ah parameters

6: Configure 802.3ah events

7: SFP Information

8: Bandwidth Control

9: L2CP Control

10: cNode Loopback

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Page 35