- Omnitron Systems Technology, Inc. Media Converter and Network Interface Device User Manual

4.3 PORT CONFIGURATION

The Port configuration screen provides access to the port level configuration parameters, such as, Port

Access, Bandwidth Control, L2CP Control, SFP information, 802.3ah, Port VLANs, Tagged VLANs and

cNode Loopback. To access the Port configuration screen, select C from the Module configuration screen

and press <ENTER>. The Port configuration screen will appear.

Module - iConverter 2FXM2 iConverter, Serial Agent

Identifier -

Chassis Number = 1 Port Access Control Setup

Slot Number = 1 ----------------------------------

Model Number = 8959N-0 11: Port 1 Enable On

12: Port 2 Enable On

Feature Selection

---------------------------------- Port VLAN Path Setup

1: 802.1Q Processing Enable Off ----------------------------------

13: Port 1 to Port 2 Enable On

2: Configure Tag VLAN Control 14: Port 1 to BP A Enable On

3: Configure VLAN Membership 15: Port 1 to BP B Enable On

4: Save TAG VLAN parameters 16: Port 2 to BP A Enable On

5: Configure 802.3ah parameters 17: Port 2 to BP B Enable On

6: Configure 802.3ah events 18: BP A to BP B Enable On

7: SFP Information 19: Port 1 to Mngmnt Enable On

8: Bandwidth Control 20: Port 2 to Mngmnt Enable On

9: L2CP Control 21: BP A to Mngmnt Enable On

10: cNode Loopback 22: BP B to Mngmnt Enable On

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Module - iConverter 2FXM2 iConverter, Serial Agent

Identifier - Host

Chassis Number = 1 Port Access Control Setup

Slot Number = 1 ----------------------------------

Model Number = 8959N-0 11: Port 1 Enable On

12: Port 2 Enable On

Feature Selection

---------------------------------- Port VLAN Path Setup

1: 802.1Q Processing Enable Off ----------------------------------

13: Port 1 to Port 2 Enable On

2: Configure Tag VLAN Control 14: Port 1 to Mngmnt Enable On

3: Configure VLAN Membership 15: Port 2 to Mngmnt Enable On

4: Save TAG VLAN parameters

5: Configure 802.3ah parameters

6: Configure 802.3ah events

7: SFP Information

8: Bandwidth Control

9: L2CP Control

10: cNode Loopback

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Page 26