- Omnitron Systems Technology, Inc. Media Converter and Network Interface Device User Manual

3.4.4 Access the 2FXM2 Remotely
Remote access to the 2FXM2 is provided via SNMP, Telnet, FTP or an external serial modem connected to
the Serial Console Port.
3.4.4.1 Accessing the 2FXM2 via NetOutlook (SNMP)
The 2FXM2 module can be remotely accessed by SNMP-client software such as Omnitron’s NetOutlook
SNMP Management Software or third-party SNMP management software. See Setting SNMP Preferences
Section 3.4.2, on how to configure the required parameters.
NetOutlook Chassis View and Trap Log Screens
3.4.4.2 Accessing the 2FXM2 via Telnet
The 2FXM2 is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It is
highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences screen, option 6.
Page 19