Instruction Manual

6.0 SPECIFICATIONS
Description iConverter 1-Module Redundant-Power Chassis
Ports 2 x RJ-45
Protocols 10Base-T, 100Base-Tx with 1536 max. frame size
Cable Types
UTP EIA/TIA 568A/568B
Connector Types
UTP RJ-45
Contact Closure Sensors Field-wireable 16-24 AWG
Power Requirements
Low Voltage DC Power 9 - 24 VDC
1.5A @ 9.0VDC
Low Voltage DC Power
Connector
2.5mm Barrel Connector or Field-wireable 16-20 AWG Terminal Connector
High Voltage DC Power +24 to +60 VDC
or
-24 to -60 VDC
0.3A @ 48VDC
High Voltage DC Power
Connector
Field-wireable 16-20 AWG Terminal Connector
PoE Power +44 to +57 VDC
or
-44 to -57 VDC
0.27A @ 48VDC
PoE Connector RJ-45 IEEE 802.3af-2003 Alternative A & B,
Pre-standard Cisco PoE
AC Power Adapter [US] 100-120 VAC, 60Hz
0.2A @ 120VAC
AC Power Adapter [Universal] 100-240 VAC, 50-60 Hz
0.2A @ 120VAC
Dimensions 5.4" (W) x 6.8" (L) x 1.0" (H)
Weight
without power adapter 1.5 lbs.
with power adapter 2.0 lbs.
Compliance UL, CE, FCC, AS/NZS 3548, & VCCI Class A
Temperature
Operational - Commercial 0 to +50
o
C
Operational - Wide Range -40 to +60
o
C
Storage -40 to +80
o
C
Humidity (non-condensing) 5 to 95%
Altitude -100m to 4000m
MTBF [hrs]
without power adapter 540,000
with US power adapter 250,000
with Univ. power adapter 100,000
Table 7: Model Specifications
Refer to Table 1 for applicable product features.
Page 23