Instruction Manual

5.0 SPECIFICATIONS
Description 8 Port 10/100 Auto-Sensing Switch
Protocols 10Base-T, 100Base-Tx,
with 1536 bytes max. frame size
UTP Cable Type EIA/TIA 568A/B
Category 5 and higher
UTP Connector Type RJ45
DIP-Switches UTP Port 1 and 2: AN/MAN, 10/100, FDX/HDX
Power Requirements 100 - 240 VAC @ 0.5A/0.4A, 50/60Hz
Dimensions W:6.7" x D:5.51" x H:1.87"
Weight 3.0 lbs
Compliances UL, CE, FCC CLass A, NEBS Level 3
Temperature Operating: 0 to +50 C
Storage: -40 to +80 C
Humidity
(non-condensing)
< 95%
Altitude (operational) < 4000m (13,000 ft)
Warning
The operating description in this Instruction Manual is for use by qualified
personnel only. To avoid electrical shock, do not perform any servicing of this
unit other than that contained in the operating instructions, unless you are
qualified and certified to do so by Omnitron Systems Technology, Inc.
Caution
All user-required operations can be performed without opening the unit. Never
attempt to open or remove the cover or tamper with the unit. There are no user
replaceable or serviceable parts in this unit. Equipment is not intended to be
installed and used in a place (home, school, or public area) accessible to the
general population.
Warranty
This product is warranted to the original purchaser against defects in material
and workmanship for a period of TWO YEARS from the date of shipment. A
LIFETIME warranty may be obtained by the original purchaser by
REGISTERING this product with Omnitron within 90 days from the date of
shipment. TO REGISTER, COMPLETE AND MAIL OR FAX THE
ENCLOSED REGISTRATION FORM. Or you may register your product on
Page 8