FlexPointTM OC12FF Product Manual

Trademarks are owned by their respective companies. FlexPoint is a trademark of Omnitron Systems Technology, Inc.
Specifications subject to change without notice. ©1998-2007 Omnitron Systems Technology, Inc.
091-04460-004C 12/07
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [e-mail] • 140 Technology Dr. • Irvine, CA 92618
Port Fiber Type Distance
Connector
SC
Wavelength
[nm]
Min. Tx Power
(dBm)
Max. Tx
Power
(dBM)
Min. Rx
Sensitivity
(dBm)
Max. Rx
Sensitivity
(dBm)
Link
Budget
(dBm)
Port 1 MM 550m
4461-X
1310
-20 -14 -26 -14 6
Port 2 SM 12km
1310
-9.5 -3 -19.5 -3 10
Port 1 MM 550m
4463-x
1310
-20 -14 -26 -14 6
Port 2 SM 34km
1310
-5 0 -23 -3* 18
Port 1 MM 550m
4469-x
1310
-20 -14 -26 -14 6
Port 2 SM 80km
1550
-5 0 -26 -3* 18
Power Adapter Kits (-x): -0 = No power adapter included, -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no power cord)
For other power and fiber configurations, contact Omnitron.
*When using these models in pairs, a minimum attenuation of 3dB is required.
Model Type OC12FF
Protocols
OC-12
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
Fiber
Connectors
SC
LED Displays
Power, Fiber Link/Activity
Dimensions
W: 3.0" x D: 4.0" x H: 1.0"
Weight
6 oz. (without power adapter)
Compliance
UL, CE, FCC Class A
Barrel
Connector
Molex
Connector
Power
Requirements
NominalVoltage:
Voltage Range:
Power Nominal:
Maximum Power:
9VDC
6.0 to 15.0VDC
0.2A @ 9VDC
1A @ 9VDC
5VDC
4.75 to 5.25VDC
0.5A @ 5VDC
0.75A @ 5VDC
Temperature
0 to 50
o
C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (Hours)
Module without Power Adapter: 2,600,000
Module with Power Adapter -1: 250,000
Module with Power Adapter -2: 100,000
The FlexPoint OC12FF fiber converter can extend the network
across single-mode fiber with distances up to 80km. In this
application, the customer's router is connected to an Add Drop
Multiplexer (ADM) providing access to the SONET ring using a
pair of FlexPoint OC12FF fiber converters. The converters
provide the multimode to single-mode conversion.