User Manual

ManualsBrandsOmnitron Systems Technology ManualsCommunicationConverter GXTM

4.3 PORT CONFIGURATION

The Port configuration screen provides access to the port level configuration parameters, such as, Port

Access, SFP information, 802.3ah, Port VLANs, Tagged VLANs and cNode Loopback. To access the Port

configuration screen, select C from the Module configuration screen and press <ENTER>. The Port

configuration screen will appear.

Module - iConverter GX/TM iConverter, Serial Agent

Identifier -

Chassis Number = 1 Port VLAN Path Setup

Slot Number = 2 ----------------------------------

Model Number = 8923-1 11: Fiber to UTP Enable On

12: Fiber to BP A Enable On

Port Access Control Setup 13: Fiber to BP B Enable On

---------------------------------- 14: UTP to BP A Enable On

1: Fiber Enable On 15: UTP to BP B Enable On

2: UTP Enable On 16: BP A to BP B Enable On

17: Fiber to Mngmnt Enable On

Enhanced Features 18: UTP to Mngmnt Enable On

---------------------------------- 19: BP A to Mngmnt Enable On

3: 802.1Q Processing Enable Off 20: BP B to Mngmnt Enable On

4: Configure Tag VLAN Control

5: Configure VLAN Membership

6: Save TAG VLAN parameters

7: Configure 802.3ah parameters

8: Configure 802.3ah events

9: SFP Status

10: cNode Loopback

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Module - iConverter GX/TM iConverter, Serial Agent

Identifier -

Chassis Number = 1 Port VLAN Path Setup

Slot Number = 2 ----------------------------------

Model Number = 8923-1 11: Port1 to Port2 Enable On

12: Port1 to Mngmnt Enable On

Port Access Control Setup 13: Port2 to Mngmnt Enable On

----------------------------------

1: Fiber Enable On

2: UTP Enable On

Enhanced Features