User's Manual

UM-003-A OPS243-A User Manual 16 OmniPreSense Corporation
Short Duty Cycle Control – set to control duty cycle operation under 1 second. The time set is the amount
of time the sensor will delay between outputting the last report and starting the next report.
Command
Name
R/W
Value
W?
Current Delay time
Read
W0
0 delay between reports
Write
WI
1ms delay
Write
WV
5ms delay
Write
WX
10ms delay
Write
W2
20ms delay
Write
WL
50ms delay
Write
WC
100ms delay
Write
WD
500ms delay
Write
WM
1000ms delay
Write
Wn
n*100ms delay
Write
0 ≤ n ≤ 9
Long Duty Cycle Control – set to control the duty cycle operation greater than or equal to 1 second. The
time set is the amount of time the module will sleep between transmit/receive pulses and processing. For
settings longer than 1 second, the RF will be powered off to save power. In this manner, lower power
operation may be achieved.
Command
Name
R/W
Value
Z?
Current sleep setting
Read
Z0
Sleep 0 Second
Write
Use to set back to normal operation.
ZI
Sleep 1 Second
Write
ZV
Sleep 5 seconds
Write
ZX
Sleep 10 seconds
Write
ZL
Sleep 50 seconds
Write
ZC
Sleep 100 seconds
Write
Z2
Sleep 200 seconds
Write
Zn
Sleep n*100 seconds
Write
0 ≤ n ≤ 9
Z=n
Set Sleep Time
Write
Set the amount of time to sleep between data
processing. Ex., n = 5 would set the module to
sleep for 5 seconds (RF powered off) between
a transmit/receive pulse and processing. 0 ≤ n
≤ 4,294,967