User guide

DOCUMENTNO:IA‐PANA85PRO_REV.A1
INSTALLATIONANDASSEMBLY INSTRUCTIONS
ALLDIMENSIONS‐MM(INCH)
MODEL:PANA85PRO
MAXLOADCAPACITY:300LB(136.07KG)

SETTINGANDADJUSTINGTILTPOSITION(S)/VERTICALANDLATERALADJUSTMENT

WARNING

• Ensurethatalladjustmentsaremadewithpropersupportofthepanelatalltimes.Noadjustments
shouldbemadeunlessdonebyaqualifiedinstallationprofessional.



TILTADJUSTMENT

• RemovethelowerboltshowninFig.1(Factoryinstallationissetat0°tilt)
• NOTE:Retainallhardwareforinstallationaftertiltpositionisselected.
• Selecttheproperholebasedonthedesiredtiltrequirement.
• Inserttheboltbackintoposition‐ensurethatthetubefromthepanelbrackethasremainedinthe
wallbracketandhasnotmovedfromtheinstallationposition.
• Secureallhardware.
Fig.1
