User guide

DOCUMENTNO:IA‐PANA103PRO_REV.A1
INSTALLATIONANDASSEMBLY INSTRUCTIONS
ALLDIMENSIONS‐MM(INCH)
MODEL:PANA103PRO
MAXLOADCAPACITY:500LB(227KG)

LATERALADJUSTMENT

• Ensurethatthepanelisproperlysupportedduringlateraladjustment.
• LiftthepanelperPanasonicliftingrequirementstoremovetheloadfromtheinstalledcomponents.
• Thepanelmaybeshifted
fromsidetosideforfinalpositioningandthensetbackintotheretaining
slotsofthewallbracket.

VERTICALADJUSTMENT

• NOTE:Verticaladjustmentshouldonlybedonebyaqualifiedinstallationprofession al.
• NOTE:Factoryinstallationispresettothelowest(bottom)position.
• Vertical
adjustmentisintendedtosupportthefinallevelingprocessoftheinstallationandshouldnot
beusedinanyotherinstallationmanner.
• LocatetheverticaladjustmentfastenerontopofeachinstallationwallbracketasshowninFig.2
• Theboltmaybeusedtoeitherraiseand/orlowertheverticalpositionforeachwallbracketasneeded
tolevel.





 




