User guide

DOCUMENTNO:IA‐PANA103PRO_REV.A1
INSTALLATIONANDASSEMBLY INSTRUCTIONS
ALLDIMENSIONS‐MM(INCH)
MODEL:PANA103PRO
MAXLOADCAPACITY:500LB(227KG)

WARNING

• Ensurethatalladjustmentsaremadewithpropersupportofthepanelatalltimes.Noadjustments
shouldbemadeunlessdonebyaqualifiedinstallationprofessional.



TILTADJUSTMENT

• RemovethelowerboltshowninFig.1(Factoryinstallationissetat0°tilt)
• NOTE:Retainallhardwareforinstallationaftertiltpositionisselected.
• Selecttheproperholebasedonthedesiredtiltrequirement.
• Inserttheboltbackintoposition‐ensurethatthetubefromthepanelbrackethasremainedinthe
wallbracketandhasnotmovedfromtheinstallationposition.
• Secureallhardware.

Fig.1