Installation Guide

4
Optional
4: Attaching additional cable covers
a. Remove the adhesive backing
from the remaining clips, line up
the cable covers and press them
firmly against the wall.
Optional: Installing the bottom cover
a. Slide the bottom cover over the
last cable cover. Ensure the
grooves on the bottom cover line
up with the ridges on the cable
cover.
5: Running your cables
a. Slide the cable covers off of the
clips.
Note: Do not pull the cable covers
off, only slide them.
b. Run your cables through the
grooves in the clips.
c. Press the cable covers firmly
against the clips and reconnect
your cables.
English
Flat Panel
4
Flat Panel
5