Installation Guide

3
Consult a qualified
installer if you
have any questions
regarding the proper
installation of this wall
mount system.
IMPORTANT
Installation Instructions
Installation Instructions
Flat Panel
1 2
Mounting with Adhesive
1: Determine your desired cable
management position
a. Hold one of the straight cable
covers against the wall and, with
a pencil, mark the center of the
cover on the wall.
2: Insert the clips into the cable
covers
a. Press two clips into each cable
cover you will be using.
Note: Place the clips farther apart
for greater stability.
3: Mount the first cable cover
a. Remove the adhesive backing of
the two clips on the first cable
cover.
b. Holding a level against the side of
the cover, lightly press the cover
against the wall.
c. When the cable cover is level and
in the desired position, press it
firmly against the wall.
English
Flat Panel
3