Instructions / Assembly

TROUBLESHOOTING
Leaks…
… between cap and bottom of lter housing:
1. Turn off water supply and open a faucet closest to the
system to release trapped air. Remove bottom of housing.
2. Clean O-ring and O-ring groove (located directly beneath
threads of housing). Lubricate O-ring with clean silicone
grease and replace securely into groove. Screw bottom of
housing onto cap and hand-tighten. Do not over-tighten.
… on inlet/outlet connections:
1. Turn off water supply. For brass ttings, tighten nut snugly
about half of a turn with a wrench.
2. Turn on water supply. If leaks persist, or if there are other
leaks on the system, turn off water supply. Call Pentair
Technical Support at 800.279.9404.
MAINTENANCE
Filter must be maintained according to manufacturer’s
instructions, including replacement of the lter cartridge.
Contact your nearest Pentair water lter dealer for
replacement cartridge pricing, or call 800.279.9404.