OMNIFILTER MODELS WHH-10BB-SG-1 & WHH-20BB-SG-1 HEAVY-DUTY HIGH-FLOW HOUSING INSTALLATION AND OPERATING INSTRUCTIONS pentair.
SPECIFICATIONS Model WHH-10BB-SG-1 Pressure Range: 30–100 psi (2.1–6.9 bar) Flow Rate: varies by cartridge Temperature Range: 40–100°F (4.4–37.7°C)) Model WHH-20BB-SG-1 Pressure Range: 30–90 psi (2.1–6.1 bar) Flow Rate: varies by cartridge Temperature Range: 40–100°F (4.4–37.
INSTALLATION NOTE: • For installation on galvanized, copper or plastic pipe. Style of fittings may vary from those shown, depending on type and size of pipe. • Use only plumber tape for fitting housing connections. • Install filter cartridge in filter housing according to the filter cartridge replacement instructions (below) before proceeding with installation. • Install filter after water meter or pressure tank. • Numbered diagrams correspond with numbered steps. 1.
OMNIFILTER® REPLACEMENT 10-INCH CARTRIDGE SELECTION GUIDE Media Micron Size (Nominal) Reduces Sediment Iron Reduces Chlorine Taste & Odor Filter Capacity† Recommended Flow Rate Well Water Use Pleated 30* Yes — — 30,000 gals or 6 months 10 gpm Yes RS15 Pleated 5* Yes — — 15,000 gals or 3 months 10 gpm — RS22 String Wound 5* Yes — — 3,000 gals or 1 months 10 gpm Yes Polyspun 5* Yes — — 6 months 10 gpm Yes RS16 Polyspun 1* Yes — — 3,000 gals or 1 months 10 gpm
OMNIFILTER REPLACEMENT 20-INCH CARTRIDGE SELECTION GUIDE Media Micron Size (Nominal) Reduces Sediment Reduces Rust Staining Reduces Chlorine Taste & Odor Lead RS6-20 Pleated 30* Yes No No TO8-20 Radial Flow Carbon 25* Yes No RS18-20 Spun Polypropylene 50* Yes DGD-5005-20 WHC-20BB-SP-5M-SG6 Polypropylene 5* RFC20-BB WHC-20BB-CS-25MSG6 FloPlus Carbon RFFE20-BB WHC-20BB-I-5M-SG-2 LR-FB20BB WHC-20BB-L-05M-SG-2 Cartridge Filter Capacity† Recommended Flow Rate Well Water Use No 60
TROUBLESHOOTING MAINTENANCE Leaks… Filter must be maintained according to manufacturer’s instructions, including replacement of the filter cartridge. Contact your nearest Pentair water filter dealer for replacement cartridge pricing, or call 800.279.9404. … between cap and bottom of filter housing: 1. Turn off water supply and open a faucet closest to the system to release trapped air. Remove bottom of housing. 2. Clean O-ring and O-ring groove (located directly beneath threads of housing).
For Pentair Product Warranties visit: Pentair.com/assets/residential-filtration-warranty 13845 BISHOPS DR., SUITE 200, BROOKFIELD, WI 53005 U.S.A. P. 262.238.400 | CUSTOMER SERVICE: 800.279.9404 | tech-support@pentair.com | pentair.com © 2022 Pentair. All rights reserved. All indicated Pentair trademarks and logos are property of Pentair. Third party registered and unregistered trademarks and logos are the propertyof their respective owners.
