Instructions / Assembly

REPLACEMENT PARTS
For replacement parts, call 800.279.9404
3
1
2
B
A
B
1
3
4
4
3
2
1
2
A
BR42887
Important Notice: Read performance data and compare the capabilities
of the system with your actual water treatment requirements. It is
recommended that the supply water be tested, before installing a water
treatment system, to determine your water treatment needs.
Test Conditions
Flow Rate= 1.25 GPM (4.73 L/min)
Filter Capacity
Capacity= 5,000 gallons (18,927 L)
Inlet Pressure= 60 psi (4.1 bar)
Temperature= 68°F +/- 5°F (20°C+/- 2.5°F)
Testing was performed under standard laboratory conditions, actual
performance may vary.
Operating Requirements for OMF1S system:
Pressure= 40-100 psi (2.75–6.89 bar)
Temperature= 40-100°F (4.4–37.8°C)
PERFORMANCE DATA
The Model OMF1S is Tested and Certied by NSF International
against NSF/ANSI Standard 42 for the reduction of substances
specied on the Performance Data Sheet.
OMF1S SYSTEM INSTALLED WITH
OMF1S-CTO FILTER CARTRIDGE
This system has been tested according to NSF/ANSI 42 and for reduction
of the substances listed below. The concentration of the indicated
substances in water entering the system was reduced to a concentration
less than or equal to the permissible limit for water exiting the system, as
specied in NSF/ANSI 42.
Model OMF1S
Substance
Inuent Challenge
Concentration
Reduction
Requirements
Average
Reduction
Standard 42
Chlorine Taste & Odor 2.0 mg/L±10% ≥50% 95.9%
Flow Rate = 1.25 gpm (4.73L/min); Capacity = 5,000 gallons (18,927 L)
Testing was performed under standard laboratory conditions, actual performance may vary.
Item
Number
Part Number Description
Quantity
Required
1 655119-94
Cartridge
OMF1S-CTO
1
2 4007144
Filter Head
Model OMF1S
1
3 4007135 Installation Kit 1
OMF1S Filtration System Instruction Manual • 7