Instructions / Assembly

CALIFORNIA PROPOSITION 65 WARNING
WARNING:
This product contains chemicals known to the
State of California to cause cancer or birth
defects or other reproductive harm.
SPECIFICATIONS
Temperature Range: ................................... 40-100°F (4.4-37.8°C)
Pressure Range: ................................... 40-100 psi (2.75-6.89 bar)
Service Flow Rate @ 60 psi (4.1 bar): ............ 1.25 gpm (4.73 L/min)
Rated Service Life:............................................................... 1 year
Dimensions: ......................................................12.25" x 3.5" x 4.8"
(311mm x 90mm x 122mm)
Weight (system only): ............................................ 1.6 lbs (0.72 kg)
PARTS INCLUDED
• Filter System with Cartridge
• Installation Hardware Kit
• 3/8” white plastic tubing
• 3/8” blue plastic tubing
• Filter change reminder sticker
• (2) #10-16 x 1.25”L screws
• 3/8" x 3/8" Female compression tting
• 3/8" x 3/8" Male compression tting
PRECAUTIONS
WARNING:
Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system. Chemical
reduction unit.
CAUTION
System must be protected against freezing, which can
cause cracking of the lter and water leakage.
NOTE:
• For cold water use only.
• Make certain that installation complies with all state
and local laws and regulations.
• The system must be maintained according to
manufacturer’s recommendations, including
replacement of lter cartridges. The contaminants or
other substances reduced by the selected cartridge
are not necessarily in your water. Ask your local water
municipality for a copy of their water analysis, or have
your water tested by a reputable water testing lab.
• After prolonged periods of non-use (such as during a
vacation) it is recommended that the system be ushed
thoroughly. Let water run for 5–6 minutes before using.
• The lter cartridges used with this system have a limited
service life. Changes in taste, odor, and/or ow of the
water being ltered indicate the cartridge should be
replaced.
TOOLS AND MATERIALS REQUIRED
• Safety glasses
• Adjustable wrench
• Tube cutter or utility knife
• Hand or electric drill (cordless recommended)
• 3/32" drill bit
• File
• Marker
OMF1S Filtration System Instruction Manual • 3