Instructions / Assembly

2. Cutting or Disconnecting the Tubing




cutter or hacksaw for copper tubing or utility knife for plastic,




3. Connecting the Tubing and Fittings
A. Connecting the Inlet:


B. 
NOTE:





4. Installing the Cartridge
A. 


B. 
  .

5. Putting the Filter into Operation
A. 
leaks. If it leaks, see Troubleshooting.
B. 


C. Turn on icemaker.
D. Check for leaks before leaving installation. If it leaks,
see Troubleshooting.
NOTE:


NOTE:



R. CARTRIDGE REPLACEMENT



1. 

2. 
3. 

4. 

5. 
6. 

installation.
1A 1B
2
t
Nut
Plastic
ferrule
Plastic Tubing: Hand-tighten, plus 1 to 11/2 turns with a wrench
Insert
Nut
Copper
ferrule
3
Copper Tubing: Hand-tighten, plus 1 to 11/2 turns with a wrench

Flex Tubing: Wrench tighten. Do not over-tighten.
R3
B
A
A
B
R4
PENTAIR OMNIFILTER IN-FF-500-SG-QC-4 Quick Change Water Dispenser / Icemaker Filter Installation and Operation Instructions • 3