Specifications

A
D
E
F
C
G
J
K
B
M
A
B
C
H
I
L
N
O
Product
d
ata
Knob and Lever Latchset
• For residential use. Not recommended for commercial use.
• 2
3
/8 " (standard) and 2 ¾" backsets available.
• Supplied for both 1
3
/8 " and 1 ¾" door thickness as standard.
• All lever latchsets meet ADA accessibility requirements.
Each set consists of solid brass knobs or levers, thru-bolted rose
mechanisms, nished rose covers, latch, strike, faceplate, spindle,
all necessary mounting screws, installation template and instructions.
About Our Tubular Latch
• 55° rotation to retract latch. (28° rotation latch available.
Refer to Prodigy Latchset Price List.)
• Tough, non-rusting materials used throughout. Face covers and
strikes are solid brass. No.014 “Full Lip” strike supplied as
standard or No.013 “T” strike as an option. Specify when ordering.
• For almost ve decades, OMNIA’s latches have been opening and
closing hundreds of thousands of doors all around the world.
Functions
• Passage: Latch operates by knob or lever from either side of door.
• Privacy: Push pin provided for privacy inside room. Emergency
release hole for outside room. Emergency release key also provided.
• Single Dummy: Trim on one side of door only. Available for surface
mounting. Knob or lever with rose.
• Pair Dummy: Two single dummies.
www.OmniaIndustries.com / ph: 973.239.7272 / fax: [phone]
8
L
atchsets
Latchset Component List
A. Door Knob/Lever (2)
B. Set Screws (2)
C. Nylon Threaded Washers (2)
D. Finished Rose
E. Adaptor E
F. Spindle (Teardrop Groove Positioned
Towards Set Screw)
G. Tubular Latch
H. Tubular Latch Faceplate
I. Tubular Latch Strike Plate
J. Adaptor J
K. Thru-bolts (2)
L. Finished Rose
M. Privacy Locking Pin
N. Washer Installation Tool
O. Emergency Release Key
NO. 014
“FULL LIP”
STRIKE
(standard)
NO. 013
“T” STRIKE
(optional)
1
1/
2
"
1
1/
4
"
1
1/
8
"
2
3/
4
”
1
3/
16
"
1
3/
4
"
2
3/
4
"
2
3/
8
"
backset
(standard)
or 2
3/
4
"
backset
(optional)
PASSAGE LATCH
2
3/
4
"
2
3/
8
"
2
1/
4
"
3
3/
8
"
3
5/
8
"
3/
4
" 7/
8
"
7MM HUB
FACEPLATE
1"
2
1/
4
"
Drawings not to scale