Specification Sheet

w w w . O m n i a I n d u s t r i e s . c o m
■
9 7 3 . 2 3 9 . 7 2 7 2
■
F a x : 9 7 3 . 2 3 9 . 5 9 6 0
24
PRODUCT DATA
MORTISE AND DEADBOLT LOCKSETS
Mortise Locksets
Available with two backset options—2
1
⁄2” or 2
3
⁄4”. Please specify when ordering.
Same strike supplied with both
2
1
⁄2" and 2
3
⁄4" b.s. locks.
Backset: Available with two
backset options: 2
1
⁄2 ” or 2
3
⁄4 ”.
Please specify backset on order.
For Doors: 1
3
⁄4” thick as standard.
For doors over 1
3
⁄4” thick, please
specify door thickness.
■ 2
1
⁄2 ” b.s.: with 3
7
⁄8 ” minimum stile
■ 2
3
⁄4 ” b.s.: with 4
1
⁄2 ” minimum stile
Case: Heavy wrought steel with zinc
dichromate finish for corrosion resistance.
■ 2
1
⁄2 ” b.s.: 3
5
⁄8 ” x 6
1
⁄16 ” x
7
⁄8 ”
■ 2
3
⁄4 ” b.s.: 4
3
⁄16 ” x 6
1
⁄16 ” x 1”
Front: Adjustable armored steel front,
with 8” x 1
1
⁄4 ” solid brass faceplate for all
lock bodies. Finished to match trim.
Latchbolt: Two-piece anti-friction
design made from solid brass (2
1
⁄2” b.s.)
or stainless steel (2
3
⁄4” b.s.). Both lock
bodies with 1” x
5
⁄8” x
3
⁄4” full throw.
Deadbolt:
■ 2
1
⁄2” b.s.: 1
3
⁄16” x
9
⁄16” x 1” full throw
solid brass with sawproof insert.
■ 2
3
⁄4” b.s.: 1
1
⁄8” x
1
⁄2” x 1” full throw
stainless steel.
Springs: High carbon steel.
Strike: Solid brass curved lip strike.
4
7
⁄8” x 1
1
⁄4” x lip 1
1
⁄4” to center.
Finished to match trim. Dust box
supplied as standard. Extended lip
strikes available.
Hand: Fully reversible. (2
3
⁄4” b.s. can be
reversed without opening case.) When
ordering specify right or left hand, and
reverse bevel if applicable.
Cylinder: Solid brass from bar stock.
Made in USA. Schlage “C” keyway
supplied as a standard, with two
Omnia nickel silver keys. When
applicable, cylinder collars are supplied
with compression spring. Available on
special order with a variety of other
keyways & key combinations.
Keying: Specify Keyed Alike (KA) when
needed. Master / Grand / Construction
keying available at
additional cost.
Safety Standards:
■ 2
1
⁄2” b.s.: Conforms to requirements
of ANSI/BHMA A156.13 Series 1000.
■ 2
3
⁄4” b.s.: UL Listed for class “A” or
lesser doors. Conforms to requirements
of ANSI/BHMA A156.2 Series 1000.
1
000 Series
— Traditional Roses —
2
5
⁄8” diameter x
9
⁄16”.
2000 Series — Modern Roses —
2
9
⁄16”
diameter x
3
⁄8”
.
2000S Series — Square Roses —
2
9
⁄1
6
” square x
7
⁄1
6
”.
3000 Series —Traditional Backplates —
10
9
⁄16” x2
3
⁄8” x
5
⁄16”.
4000 Series —Modern Backplates —
8
1
⁄4” x2” x
1
⁄4”.
11000 Series —Traditional Backplates —
10
5
⁄8 ” x2
3
⁄8” x
5
⁄1
6
”.
1
2000 Series
— Modern Backplates —
10
9
⁄1 6” x2
3
⁄8 ” x
5
⁄1 6”.
24000 Series — Roped Backplates —
1
0
5
⁄8 ”
x2
7
⁄16”
x
3
⁄8 ”
.
25000 Series — Beaded Backplates —
10
5
⁄8 ” x2
3
⁄8” x
5
⁄1
6
”.
26000 Series —Traditional Backplates —
10
5
⁄1 6” x2
3
⁄4 ” x
5
⁄1 6”.
50000 Series — Ornate Backplates —
17
3
⁄4 ” x2
5
⁄16” x
1
⁄8 ”.
51000 Series — Ornate Backplates —
14
15
⁄1
6
” x3
3
⁄8” x
1
⁄8”.
5
2000 Series
— Ornate Backplates —
13” x2
3
⁄8” x
7
⁄16”.
54000 Series — Ornate Backplates —
1
3
3
⁄4”
x2
5
⁄16”
x
3
⁄8 ”
.
55000 Series — Ornate Backplates —
15
1
⁄8” x2
5
⁄1
6
” x
3
⁄8 ”.
56000 Series — Ornate Backplates —
11
1
⁄4” x2
5
⁄16” x
3
⁄8 ”.
U
L
®
Made In U.S.A.
2
3
/
4
" Backset Lock
2
1
/
2
" Backset Lock
Extended lip strikes available.
Mortise & Deadbolt Solid Brass Backplates
DRAWINGS NOT TO SCALE
C
F
Case must be opened to
reverse handing and/or bevel.
Fire Rated
Fully reversible without
opening case.